tom_specs_clitool — the TomSpecs generator and gate suite

> Cross-references. > tom_specs_model/doc/som_multiplatform_spec_model.md > is the authority for the Spec Object Model this package generates — naming, > versioning and the committed artefacts (SOM §4), what the generator produces > (SOM §5), the two access paths (SOM §6) and the generated surfaces themselves > (SOM §8). > tom_specs_model/doc/som_generator_config.md > owns the tom-spec-object-model config grammar in full; > tom_specs_model/doc/som_toolchains.md > owns the per-language build and verify toolchains; > tom_specs_model/doc/tom_specs_model_rules.md > owns the model-authoring rules and the structural invariants the static > validator here enforces; and > tom_specs_model/doc/index.md owns the § > citation convention the gates in this package resolve. This README is the > catalogue of what the package ships and how to run it; those documents own > what it must produce and why.

CLI tools for TomSpecs model analysis, validation, and SOM code generation.

Where this fits

TomSpecs is a method for building software from structured specification documents: a project is written up as a set of typed documents — the Specification Object Model, or SOM — and the code skeleton is generated from them. Those documents have to be readable and editable from whatever language a consuming system happens to be written in, which means the model cannot live only as Dart classes. tom_specs_clitool is the generation host that closes that gap: from the single source of truth — the annotated Dart model in tom_specs_model — it emits, per language, a lossless meta-data file, DocSpecs and YAML schemas, and a typed document-editing facade layered over a hand-written generic runtime.

It exists as its own package because the model must not depend on the machinery that reads it. tom_specs_model is annotated data with no analyzer dependency and no tools; everything that inspects it — the analyzer-backed reader, the nine emitter triples, the static validator, the outliner, the JSON exporter and the four correspondence gates — lives here. So this package sits directly above the model and below everything else in the TomSpecs tree: the nine tom_som_<lang>_runtime / tom_som_<lang>_v0 pairs are its output, and the editor, the reviewer and tom_spec_engine all consume that output rather than the model itself.

Overview

The generated component is split into a fixed, hand-written runtime and a generated, typed facade — one project each, per language:

Layer	Project	Authored	Role
Generic runtime	tom_som_<lang>_runtime	by hand	Memory representation ( SpecDocument ), the meta-model "reflection" classes ( SpecModel & friends), validation, and YAML/Markdown load-save. No version suffix.
Typed facade	tom_som_<lang>_v0	generated	Typed, code-completed document-editing API ( D00SolutionBlueprint etc.) over the runtime's memory representation. Carries the version suffix ( _v0 , _v1 , …).

Both expose the same document through two parallel access paths (SOM §6): the type-safe path (the generated classes) and the generic / meta-model path (the runtime + the meta-data file). The typed path is optional ergonomics; the generic path alone can read, write, validate, load, and save any document.

All nine languages are shipped. Every target — Dart, Python, Java, JavaScript, TypeScript, Go, Rust, C, and C++ — has a hand-written generic runtime and a generated typed facade. generate_som.dart has a typed emitter, a generic generator and a meta emitter for each; none is skipped. Dart and Python are the reference ports; the other seven were ported from them.

The second half of the package is correspondence. A generated tree goes stale the moment the model moves, and a documentation claim goes stale the moment what it describes moves — silently, in both cases. So every claim this package and its documents make is held by something that fails: a model fingerprint for the nine packages, an invariant-id cross-check for the validator, an ArgParser cross-check for the entrypoint table below, and three citation gates for the ids the TomSpecs documents cite inline.

Installation

Published to pub.dev. As a command-line tool it is normally a dev dependency:

dev_dependencies:
  tom_specs_clitool: ^0.2.0

Most use is from a checkout of this workspace rather than from a package consumer, because the generator reads and writes sibling directories:

cd tom_ai/ai_build/tom_specs_clitool
dart pub get

Features

Generation

Capability	Entry point	Produces
Nine-language SOM emission	bin/generate_som.dart	tom_som_<slug>_v0 per configured language: typed facade, meta/spec_model.meta.json , schemas/ , language-native manifest
Serialization-order stamping	bin/stamp_serialization_order.dart	@SerializationOrder(n) renumbered across the model, 0-based per class in source-declaration order
Spec-ops registry	bin/spec_ops.dart	tom_specs_model/lib/src/generated/spec_ops.g.dart — every class's child slots, shallow clone, yaml scalar, and each projection root's connect: binding
DocSpecs + YAML schemas	bin/docspecs_schema.dart, bin/docspecs_yaml_schema.dart	The schema folders, standalone, for a single model package
CodeSpecs area catalogue	bin/codespecs_areas.dart	codespecs_areas.json — the 27-area catalogue the nine runtimes' extract surface reads

Model inspection and export

Capability	Entry point	Produces
Class-tree outlines	bin/outliner.dart	A compact outline of the model from any of the 14 document roots, or from the container root
Class-graph export	bin/model_json.dart	spec_model.json — the resolved graph the editor and reviewer apps browse
Static validation	SpecModelValidator (lib/src/validator.dart)	Field-type rules, @ContentType compatibility, cycle detection, the content: String? override, and all seventeen tom_specs_model_rules.md §10.2 structural invariants

Gates

Each fails a build step rather than reporting a warning.

Gate	Holds	Runs from
Model freshness	The nine generated packages against a fingerprint of the model source	test/model_freshness_test.dart, default suite
Invariant correspondence	tom_specs_model_rules.md §10.2's invariant list against the validator's implementation, in both directions	test/invariant_correspondence_test.dart
Entrypoint options	This README's bin/ table against each entrypoint's own ArgParser , in both directions	test/entrypoint_options_test.dart
Todo citations	Every cited quest-todo id resolves to exactly one open todo	bin/check_todo_citations.dart, test/todo_citations_test.dart
Section citations	Every § citation resolves to a real heading under index.md's convention	bin/check_section_citations.dart, test/section_citations_test.dart
OE- citations	Every cited open-ends id has a register row	bin/check_oe_citations.dart, test/oe_citations_test.dart
Frozen locks (SCC45)	No package in tom_ai/ai_build — samples and nested fixtures included — resolves a tom_* version behind one already in the pub cache, and no sample declares a chain floor below it. The repo's own copy of the d4rt model guard, run here because this is the suite the repo runs routinely and test/ is not shipped	test/scc45_resolution_guard_test.dart
Nine-plane parity	Every capability the contract names is carried by all nine language runtimes	bin/check_som_parity.dart, test/som_parity_test.dart
Release closure	The release-1 package set is dependency-closed	bin/check_release_closure.dart, test/release_closure_test.dart
Release drift	Every release member is at its published tree, or says why not	bin/check_release_drift.dart, test/release_drift_test.dart
Published tests	Every published package's own tests run from its pub.dev archive	tool/verify_published_tests.sh (a release step, not a standing gate)
Doc coverage	Every measured package is at or above its ratchet floor, and enables public_member_api_docs	bin/check_doc_coverage.dart, test/doc_coverage_test.dart
Formatting	Every governed package is what dart format would write	bin/check_format.dart, test/format_test.dart
Shipped script paths	Every path literal in a shipped example/ / bin/ / tool/ script resolves inside its own package	bin/check_shipped_paths.dart, test/shipped_script_paths_test.dart
Spec-tree duplication	The doc lines stated in both spec-tree surfaces, against a committed baseline that may shrink and never grow	bin/check_spec_tree_duplication.dart, test/spec_tree_duplication_test.dart
CodeSpecs derivation	A generated CodeSpecs trio against the codespecs_derivation_contract.md §6 checks	bin/validate_codespecs.dart

Quick start

From the tom_specs_clitool package root:

# Regenerate all nine language packages from the annotated Dart model.
dart run bin/generate_som.dart
# → ../tom_som_{dart,python,java,javascript,typescript,go,rust,c,cpp}_v0
#   each with lib/ (or src/), meta/spec_model.meta.json, schemas/, manifest

# Re-render the committed outlines, then run the three citation gates.
./tool/regenerate_outlines.sh
# → 16 outlines under ../tom_specs_model/generated-doc/outlines/
# → exits non-zero if any cited todo id, § section or OE- id has gone stale

Both are idempotent: a second run with an unchanged model rewrites the same bytes. Commit the diff.

Usage

Configuration (tom_som.yaml)

The generator reads one top-level tom-spec-object-model block. The default config lives at tom_som.yaml beside this README. Full grammar: ../tom_specs_model/doc/som_generator_config.md; parser: lib/src/spec_object_model_config.dart.

tom-spec-object-model:
  version-label: v0            # optional, default "v0" — suffix on tom_som_<slug>_<label>
  output-base: ..              # optional, default "." — base for default output roots,
                               #   resolved RELATIVE TO THE CONFIG FILE'S DIRECTORY.
  document-roots:              # optional — absent/empty ⇒ generate ALL 14 document roots
    - D00SolutionBlueprint
    - D01CurrentLandscapeAssessment
  languages:                   # required, non-empty
    - dart                     # short form ⇒ default output root
    - python
    - language: java           # map form ⇒ explicit output override
      output: custom/java/tom_som_java
    - c++                      # alias-aware; resolves to slug "cpp"

Key	Type	Default	Meaning
version-label	String	v0	Version suffix on generated project names (_v0, _v1, …).
output-base	String	.	Base dir for default per-language output roots, resolved relative to the config file. The shipped .. places generated projects as siblings of tom_specs_clitool under tom_ai/ai_build/ .
document-roots	List\<String\>	all 14 roots	Document root type names to generate; empty/absent means every root.
languages	List	(required)	Generation targets, in order. Each entry is a token string or a {language, output} map.

Language tokens are case-insensitive and alias-aware (js→javascript, ts→typescript, golang→go, rs→rust, c++/cxx→cpp, py→python). Each resolves to a package-safe slug used in the project name tom_som_<slug>_<version-label>. The parser rejects an empty/unknown/duplicate language, a wrong-typed value, a non-string document-roots entry, or a document lacking the tom-spec-object-model block.

Running the generator

# Generate every configured language target from the default config:
dart run bin/generate_som.dart

# Use a specific config and override key paths:
dart run bin/generate_som.dart \
  --config tom_som.yaml \
  --model   ../tom_specs_model \
  --runtime ../tom_som_dart_runtime \
  --py-runtime ../tom_som_python_runtime

Option	Default	Purpose
-c, --config	<clitool>/tom_som.yaml	The tom-spec-object-model config YAML.
--model	<ai_build>/tom_specs_model	The source model package to read.
--runtime	<ai_build>/tom_som_dart_runtime	Dart runtime package the generated pubspec depends on.
--py-runtime	<ai_build>/tom_som_python_runtime	Python runtime the generated manifest depends on.
--java-runtime	<ai_build>/tom_som_java_runtime	Java runtime the generated manifest depends on.
--js-runtime	<ai_build>/tom_som_javascript_runtime	JavaScript runtime the generated manifest depends on.
--ts-runtime	<ai_build>/tom_som_typescript_runtime	TypeScript runtime the generated file: dep points at.
--go-runtime	<ai_build>/tom_som_go_runtime	Go runtime the generated go.mod replace targets.
--rust-runtime	<ai_build>/tom_som_rust_runtime	Rust runtime the generated Cargo.toml path dep targets.
--c-runtime	<ai_build>/tom_som_c_runtime	C runtime the generated Makefile RUNTIME_DIR targets.
--cpp-runtime	<ai_build>/tom_som_cpp_runtime	C++ runtime the generated Makefile RUNTIME_DIR targets.
--model-version	major component of the model version	Override the integer model-version stamp.
-h, --help	—	Usage.

Only the runtime options for languages actually listed in the config's languages block matter; the rest keep their defaults and are unused.

Version stamp. The integer model-version and the human label are read from the model's lib/src/version.versioner.dart (version, buildNumber, gitCommit, buildTime). The buildTime is reused as the meta-data's generatedAt, so re-running the generator without rebuilding the model produces a byte-identical tree (idempotent; SOM §4.3). The committed artefacts are the authoritative output — consumers never run the generator (SOM §4.3).

> The generator only writes the module/lib, meta/, schemas/, and the > manifest; it never deletes files. Hand-authored test/, example/, and > examples/ directories survive regeneration.

Freshness gate. Regenerate after every change to tom_specs_model — the meta is lossless, so even a reworded doc comment or an added annotation argument changes all nine packages. This is enforced, not remembered: a canonical run writes tool/model_surface.stamp.json with a fingerprint of the model it read, and test/model_freshness_test.dart fails in the default suite when the model has moved since. See _copilot_guidelines/som_regeneration.md for what the fingerprint covers and what it deliberately ignores. Commit the stamp together with the regenerated artefacts.

The same run also regenerates tom_specs_model's own lib/src/generated/spec_ops.g.dart, the SpecClassOps registry — it is generated from the same model by the same reader, so it goes stale at the same moment, and one stamp certifies both.

Member serialization order. stamp_serialization_order.dart --package ../tom_specs_model rewrites the model source to pin each member's on-disk emission order (0-based, per class, source-declaration order). The ordinal flows through ModelReader → ModelJsonExporter into the meta-data, so every language serialises members in the authored order. Re-run it after any model edit that adds, removes, or reorders fields; it is idempotent (old annotations are stripped and renumbered).

Entrypoints

Related entrypoints in bin/:

The Options column is the entrypoint's whole input surface bar --help, and test/entrypoint_options_test.dart holds it against each file's own ArgParser in both directions — an option added without a mention here fails, and a flag named here that no longer exists fails. It is enumerated rather than summarised because the two rows that drifted did so by summarising: one described nine inputs as "two", and a reader who trusted it ran the tool over four checks it silently skipped.

Entrypoint	Purpose	Options
generate_som.dart	Generate the per-language tom_som_<slug>_<label> projects ("Running the generator" above).	--config --model --model-version --runtime --py-runtime --java-runtime --js-runtime --ts-runtime --go-runtime --rust-runtime --c-runtime --cpp-runtime
model_json.dart	Export the resolved meta-data class graph alone. Refresh either committed asset with --target editor / --target reviewer — the target owns both the path and the version stamp, which the two assets pin differently ( tom_specs_model/doc/tom_specs_model_meta_schema.md , "Refreshing the committed assets"). --package + --output is for ad-hoc exports elsewhere, and --model-version / --model-label override the stamp it writes.	--target --package --output --model-version --model-label
outliner.dart	Render a class-tree outline of the model from any document root. --root-type picks the root; the two --show-schema-annotations / --stop-at-detailed-in flags set how much of each class is rendered, and --max-line-length wraps it.	--package --root-type --output --max-line-length --show-schema-annotations --stop-at-detailed-in
check_todo_citations.dart	Check that every quest-todo id cited inline in tom_specs_model/doc and in the cited project READMEs still names exactly one open todo. Exits 1 on a citation of closed or non-existent work, and on a bare stem that several todos answer to. --no-default-readmes scans the doc folder alone; --doc retargets it, --extra adds a file, --doc-folder adds a package doc/ tree ( --no-default-doc-folders drops the default ones), --quest names the todo corpora to resolve against and --vocabulary the token allowlist; --verbose lists every resolution. Run by tool/regenerate_outlines.sh and by test/todo_citations_test.dart (see below).	--doc --extra --default-readmes --doc-folder --default-doc-folders --quest --vocabulary --verbose
check_section_citations.dart	Resolve every § citation in tom_specs_model/doc against index.md 's citation convention — a bare §N means this document. Exits 1 on a citation that resolves to no heading. The gate is closed : its default corpus is the doc folder, every TomSpecs README ( defaultCitedReadmes ), every package doc/ folder ( defaultCitedDocFolders ) and the comments of every citing source tree ( defaultCitedSourceRoots — each package's lib/ , bin/ , test/ and tool/ ). The last two enumerate roots and discover the files beneath them, so a guide or a source file added tomorrow is gated the day it is written. Comments are read per kind: Dart's /// through a parse (a line scan reads a test fixture's string literal as a doc comment), # in shell/Python/YAML, // in the C family the eight non-Dart SOM planes are written in. --extra <file> adds one more file to that corpus, --doc-folder <dir> adds a package doc/ tree, --doc retargets the doc folder and --source the source roots, and --no-default-readmes / --no-default-doc-folders / --no-default-sources drop any default set; --verbose lists every resolution.	--doc --extra --default-readmes --doc-folder --default-doc-folders --source --default-sources --verbose
check_oe_citations.dart	Resolve every OE- id cited in the editor project, the doc folder and the quest's bookkeeping against the Open-Ends Register ( tom_specs_editor_specification.md §22). Exits 1 on a citation with no register row, and on a register that defines one id twice. --root / --register retarget it; --verbose lists every resolution.	--register --root --verbose
check_format.dart	Report every governed Dart file dart format would rewrite, against the committed manifest ( tool/format_set.yaml ). Shells out to the installed dart format rather than linking package:dart_style : a pinned formatter and the SDK's binary drift apart at every SDK bump, and a gate asserting a different style from the command developers run is worse than none. Reports, never repairs — dart format <path> is the repair, and a gate that rewrote files would edit a branch at a moment nobody chose. Enumerates the files itself so *.b.dart can be excluded: tom_spec_engine 's generated D4rt bridge is 973,181 lines and costs five minutes against four seconds for everything else. test/format_test.dart runs it in the default dart test . Exits 1 unformatted, 2 could not run.	--manifest --container-root
check_shipped_paths.dart	Check that every relative path literal in a shipped script of the nine publishable Dart packages resolves onto something that exists inside that package. The defect it exists for: tom_som_dart_v0 published six examples of which three could not run , each reading a document from the unpublished tom_som_conformance ; four tool/ scripts and one shipped test/ file had the same fault, and it was found twice by accident before it was found on purpose. Both resolution bases are tried — File('x') resolves against the cwd (the package root under dart run / dart test ) and Platform.script.resolve('x') against the script's own directory, and which applies is not visible from the literal — so a literal is accepted when either lands inside the package. Scope is example/ , examples/ , bin/ and tool/ , minus anything a .pubignore takes out of the archive; test/ is deliberately excluded because a workspace tool's tests are legitimately workspace-bound. Comments and import / export directives are skipped. --package repeats to retarget, --container-root relocates, --verbose lists every scan. Exits 1 naming each file, line and literal. test/shipped_script_paths_test.dart runs it in the default dart test .	--package --container-root --verbose
check_spec_tree_duplication.dart	Report every doc-comment line over 45 characters stated in both tom_specs_reviewer/lib and tom_forge/tom_specs_editor/lib , against the committed baseline ( tool/spec_tree_shared_docs.txt ). The two apps render the same class graph through parallel widget trees, and the hazard is asymmetric : the reviewer is documentation-gated at 100% with public_member_api_docs enabled and the editor is out of documentation scope ( tom_specs_documentation_standard.md §6), so a forked explanation is maintained on one side only and drifts on the other with nothing saying so. A ratchet, not a "must be empty" check : some duplication is the intended end state — when a rule moves to tom_som_dart_runtime and both trees cite it, the citation reads the same in both — so demanding zero would push a writer to paraphrase one of the two apart, which is the drift being prevented. The set may shrink and never grow; --record re-records it, and a shrink is reported with the lines to re-record. test/spec_tree_duplication_test.dart runs it in the default dart test . Exits 1 on a new shared line, 2 if either tree is missing.	--record --baseline --container-root
check_doc_coverage.dart	Check public-API dartdoc coverage against the committed manifest ( tool/doc_coverage_manifest.yaml ), which transcribes the tom_specs_documentation_standard.md §5 bars — 95% for the libraries, tools and SOM runtimes, 90% for tom_specs_reviewer . Parses every lib/**.dart with the analyzer (not a regex: the campaign's own scanner needed twelve corrections before it agreed with the lint) and counts each public declaration and public member, excluding what public_member_api_docs excludes — synthetic members, @override members, and the setter half of a getter/setter pair. Ratchet only : a floor may rise and never fall, and --raise refuses to lower one, reporting a held floor as a regression rather than as approval. Also fails a package that does not enable the lint, and any entry for an exempt (generated tom_som_*_v0 ) or excluded ( tom_specs_editor ) package. test/doc_coverage_test.dart runs it in the default dart test .	--manifest --root --report --raise
check_som_parity.dart	Report a capability the shared contract names that some language plane does not carry — the question the conformance corpus cannot ask, since it proves the nine ports agree about what they SHARE and is blind to what only one of them has. The vocabulary is the lowerCamelCase tokens of the conformance corpus filtered to what the reference plane (Dart) implements: taking it from Dart's sources alone reported 185 one-plane tokens, almost all local names, and a check whose first run reports 185 things is one nobody runs twice. Matching is by containment over normalised identifiers , which folds enumValueUnknown / ENUM_VALUE_UNKNOWN / EnumValueUnknown together and folds C's prefixed spelling ( som_doc_add_list_item contains addlistitem ) — without it, 26 of the first run's 31 findings were C being C. Acknowledged asymmetries live in tool/som_parity_exceptions.yaml , and an entry covers only the planes it measured, so the same gap spreading to one more plane goes red. An entry that outlived its gap is reported too. Exits 1 on either. test/som_parity_test.dart runs the same walk in the default dart test .	--manifest --container-root --verbose
check_release_closure.dart	Check that the release-1 package set ( tool/release_set.yaml ) is dependency-closed : no member reaches, directly or transitively, a workspace package outside the set other than an approved published crossing — and never an excluded package ( tom_spec_engine , editor, reviewer, tom_brain_* , tom_assistant* , tom_d4rt / _generator ), which is red even if allowlisted. Walks dependencies transitively (continuing through approved crossings), classifies members' dev_dependencies and every dependency_overrides entry, verifies path: deps land on the manifest's directory for the name, and existence-checks the non-Dart source-only members. Exits 1 naming each offending edge. test/release_closure_test.dart runs the same walk in the default dart test run, so a dependency added later goes red rather than passing unseen.	--manifest --container-root --verbose
check_release_drift.dart	Report which release-set members have moved since the commit that introduced their current version: line , and fail on any that are not acknowledged. The anchor is the version bump rather than a release tag, because these packages publish one at a time; the earliest commit that set the string wins, so a version reverted and re-applied still anchors to the first time. Each package's history is read in the repository that actually holds it — tom_core_codespecs is in a different one, and a single container-root git would report no history for it and call that clean. Drift is failed only when unpublished_drift: does not name the package: a gate that failed on any drift would be red from the first edit after every publish. A version no commit ever set is a violation, not a pass.	--manifest --container-root --verbose
stamp_serialization_order.dart	Re-stamp @SerializationOrder(n) on every model member in source declaration order (SOM §5.2). Run this on tom_specs_model after editing the model ( --package ), before regenerating; --dry-run reports what it would rewrite.	--package --dry-run
validate_codespecs.dart	Run the codespecs_derivation_contract.md §6 checks over a generated CodeSpecs project trio. Takes --shared / --client / --server ; exits 0 clean, 1 on any violation, 2 on bad usage. The trio is the pass's subject , not its only input: four checks cannot be answered from emitted code alone, and each takes its own corroborating input — --migrations (13), --cs-vocabulary + --core-source (9), the three paths --regenerated-shared / --regenerated-client / --regenerated-server (31), and --extracts (32–36), the run's generated-doc/codespecs_extracts tree. The extracts answer two different questions: the specification text the comment checks (32, 33, 34) hold the emitted doc comments against, and the routing the self-sufficiency checks (35, 36) compare against the trio's back-links, per §9.6 of codespecs_mapping.md . Give the whole extract tree or none — a partial one understates what the trio was supposed to carry, and check 35 would pass a gap it could not see. Each corroborating input is optional, and an absent one names on stdout the checks it left unrun, so a skipped check never reads as a passed one.	--shared --client --server --migrations --extracts --cs-vocabulary --core-source --regenerated-shared --regenerated-client --regenerated-server
codespecs_areas.dart	Transcribe codespecs_mapping.md §4.1 + §4.4.3 + §4.4.6 ( --mapping ) into tom_specs_model/generated-doc/codespecs/codespecs_areas.json ( --output ) — the 27-area catalogue (26 active parts + CE-EN, the domainEnum member kind's extract home) the nine-runtime spec_codespecs_extract surface reads as its input. --check verifies the committed file without writing, and test/areas_catalog_test.dart runs the same comparison.	--mapping --output --check
docspecs_schema.dart	Emit the DocSpecs schema for one model package ( --package , required) into --out-dir , stamped with --version / --label .	--package --out-dir --version --label
docspecs_yaml_schema.dart	Emit the YAML schemas into --out-dir . Split from docspecs_schema.dart above: the two emit different artefacts from different inputs, and one row for both could not say which option belonged to which.	--out-dir
spec_ops.dart	Regenerate tom_specs_model/lib/src/generated/spec_ops.g.dart — the SpecClassOps registry giving every model class its child slots, shallow clone and yaml scalar, plus each projection root's connect: binding. The ad-hoc entry point: generate_som.dart produces the registry as part of the canonical regeneration, so reach for this only to write it elsewhere ( --output ) or to refresh it alone against a given model ( --package ) without a nine-language run.	--package --output
summaries.dart	Build an analyzer sdk_summary.sum (and, with --package , a one-off grouped packages.sum ) for a single consumer. This is not the producer of tom_specs_editor 's scoped summary asset set — that set has one generator, tom_forge/tom_dart_editor_bundler , which also emits the summary_scopes.g.dart helper naming its asset keys. Here it serves --sdk-only , writing into --out-dir (see split_sdk_summary.dart below).	--package --out-dir --sdk-only
build.dart	Build orchestration for the editor app. Its --generate-summaries step invokes the bundler against tom_specs_editor/buildkit.yaml rather than generating the asset set itself, so the assets and the paths the app asks for cannot disagree. --os picks the target platform, --buildkit the config, --model / --editor / --summaries the paths it reads, and --no-flutter-build stops before the Flutter step.	--os --model --editor --summaries --generate-summaries --buildkit --no-flutter-build

And in tool/ — thirteen entries: five scripts, one library file two of them share, and seven data files a gate reads. A script here is a maintained entry point, not a scratch file: one-shot census and codemod tooling is deleted once its campaign closes, because a script that reads a shape the model no longer has is worse than absent — it still looks runnable.

Entry	Purpose	Re-run when
regenerate_outlines.sh	The drift-proof batch entry point: renders all 16 committed outlines ( DocSpecsProject + D00–D13, plus the compact SolutionBlueprint ) into tom_specs_model/generated-doc/outlines/ , then runs all three citation gates — check_todo_citations.dart , check_section_citations.dart and check_oe_citations.dart — as blocking steps under set -e .	Any model-shape change, and any documentation pass. Commit the diff.
verify_published_tests.sh	Download each release member's actual archive from pub.dev , dart pub get it in a directory with no workspace siblings, and run its shipped tests. A release step rather than a standing gate: the archive's tests are only meaningful against the archive's dependencies, and a local tree run against published siblings reports the stale-publish drift as a test failure. It therefore refuses to start while check_release_drift.dart is red ( --allow-drift overrides). Downloads rather than reconstructs the archive from git ls-files minus .pubignore , because a reconstruction re-implements pub's packaging rules and would hide the untracked-fixture case that motivated this. --strict makes a skip a failure.	After a lockstep publish.
regenerate_api_references.sh	The API-reference driver over all eighteen SOM packages, running the eight per-language generators into <package>/doc/api/reference/ . Its shape is tom_som_conformance/tool/run_all_suites.sh 's: per-target selection, and a skip with the reason stated when a toolchain is absent, with --strict turning a skip into a failure. The rendered output is gitignored ( som_toolchains.md , "Documentation generation").	The documented sources change and a reference is wanted locally.
provision_doc_generators.sh	Report which of the eight documentation generators a host carries, and install the only two that are ever a documentation-only install — pdoc and doxygen . Reports by default and installs on --install ; --dry-run prints the commands, --markdown emits the som_toolchains.md host table. For pdoc it reports the interpreter behind the tool and checks it for PyYAML and Python >= 3.13, because pdoc imports the module rather than parsing it, and below 3.13 it re-parses the whole module per class — so the version alone cannot tell a working install from one that dies at import or one that never finishes on a facade.	A host is brought up for documentation generation.
lib/doc_toolchain_path.sh	Not an entry point: the toolchain PATH rules the two scripts above share, so the provisioner cannot certify a host the driver then skips. Resolves what a non-interactive shell hides — ~/.cargo/bin and the Go tarball, Dart when it is the SDK bundled with a Flutter checkout, and javadoc from JDK 21 by preference (Homebrew's openjdk@21 is keg-only, so a platform /usr/bin/javadoc shim for another major wins by default).	A toolchain installs somewhere the rules do not look.
split_sdk_summary.dart	Turns assets/sdk_summary.sum into the committed lib/src/sdk_summary/ chunk set that analyzer_bootstrap.dart loads — the only producer of it. Pairs with bin/summaries.dart --sdk-only , which builds the .sum .	The Dart SDK version moves ( tom_specs_model/doc/som_toolchains.md , "Regenerating after an SDK change").
format_set.yaml	Data, not a script: the committed record of which trees dart format governs, plus the source directories checked in each and the *.b.dart suffix it does not govern. Its header carries the two decisions behind it — the style is the SDK default and deliberately unpinned (Dart 3.7 removed the short style and offers no way back), and generated Dart inside the gate obliges its generator to emit formatted output, which is why generateSpecOpsRegistry runs dart format over what it writes.	A package joins or leaves the quest.
doc_coverage_manifest.yaml	Data, not a script: the committed record of the agreed documentation bar — a floor: and the tom_specs_documentation_standard.md §5 target: per measured package, plus the exempt and excluded lists. Read by bin/check_doc_coverage.dart and test/doc_coverage_test.dart . Its header states the ratchet rule and what the measurement cannot see ( tom_specs_documentation_standard.md §5 discounts a comment that restates its identifier; no mechanical check can).	A sweep raises coverage — via --raise, never by hand.
release_set.yaml	Data, not a script: the committed manifest of the release-1 package set — the nine-package Dart chain, the source-only non-Dart runtime directories, the approved published crossings each with its required reason, and the unpublished_drift: acknowledgements. Read by bin/check_release_closure.dart , bin/check_release_drift.dart and both their tests.	The release scope changes, a crossing is approved, or a member is knowingly left behind its published version.
spec_tree_shared_docs.txt	Data, not a script: the committed baseline of doc lines stated in both spec-tree surfaces. Its header states the ratchet rule and what to do when the set grows. Read by bin/check_spec_tree_duplication.dart and test/spec_tree_duplication_test.dart .	A shared explanation is removed — via --record, in the same commit.
model_surface.stamp.json	Data, not a script: the model fingerprint a canonical generate_som.dart run writes, against which test/model_freshness_test.dart checks in the default suite.	Written by the generator; commit it with the regenerated packages.
som_parity_exceptions.yaml	Data, not a script: the committed record of accepted nine-plane asymmetries and known unported capabilities, read by bin/check_som_parity.dart and test/som_parity_test.dart . Its header states the difference between the two kinds, which is the whole point of the file: an ACCEPTED asymmetry is the planes legitimately differing (each language spells a date in its own type system), a KNOWN GAP is a capability that really has not been ported and is written down only so it stops masking the next one.	A gap is closed, or a new asymmetry is measured and accepted.
todo_citation_vocabulary.txt	Data, not a script: the token allowlist that keeps ordinary technical terms from colliding with the discovered todo-id shapes. A token list, never a path list.	A false positive appears — add the one token.

What is generated (per language)

Each target lands at <output-base>/tom_som_<slug>_<version-label>. For Dart:

tom_som_dart_v0/
├── pubspec.yaml              # depends on tom_som_dart_runtime
├── lib/tom_som_dart_v0.dart  # the typed facade
├── meta/spec_model.meta.json # lossless meta-data: every class, member, annotation
├── schemas/                  # 14 DocSpecs schema folders (one per document root)
│   ├── solution-blueprint/ … └── transition-rollout-plan/
├── example/                  # hand-authored samples (a/b/c) — survives regen
└── test/                     # hand-authored generated-tree suite — survives regen

Every other language mirrors this shape — the same meta/, schemas/, hand-authored samples, and tests — differing only in the facade file and the language-native manifest that declares the runtime dependency:

Language	Facade	Manifest	Runtime dependency mechanism
Dart	lib/tom_som_dart_v0.dart	pubspec.yaml	path/hosted dep on tom_som_dart_runtime
Python	tom_som_python_v0.py	pyproject.toml	dep on tom_som_python_runtime
Java	src/…	pom.xml	dep on tom_som_java_runtime
JavaScript	index.js (module)	package.json	dep on tom_som_javascript_runtime
TypeScript	index.ts (module)	package.json + tsconfig.json	file: dep on tom_som_typescript_runtime
Go	package source	go.mod	replace → tom_som_go_runtime
Rust	src/lib.rs	Cargo.toml	path dep on tom_som_rust_runtime
C	header + source	Makefile	RUNTIME_DIR → tom_som_c_runtime
C++	header + source	Makefile	RUNTIME_DIR → tom_som_cpp_runtime

• Meta-data file (meta/spec_model.meta.json) — the resolved model graph

the generic runtime loads. Lossless per SOM §5.3: it carries modelVersion (integer major), modelVersionLabel (build stamp), containerRoot, and for every reachable class its name, doc-comment, identity annotations, and for every field its type, nullability, list/enum-ness, render classification, and all annotation arguments. - Typed facade — typed document-editing classes (see Consuming the generated code below): the D00SolutionBlueprint root plus every reachable section, form, list and enum class. - Schemas — the DocSpecs schema and the *.docspecs.yaml YAML schema, per document root.

Three class counts, and they measure different things. The meta-data reports classCount: 1254 — the model classes, including the DocSpecsProject container root. A generation run covers 1253 of them: the container root is reachable from no @Document, so no run can ever emit it. That figure is what each Som*GenerationResult.emittedClassCount reports and what generate_som.dart prints per language, and under a document-roots: filter it drops further. The Dart facade then declares 3989 classes — the 1253 it can instantiate plus one small accessor class per form, named <Owner><Form>Form, giving the form's fields typed getters. That is 2736 accessor classes, and 1253 + 2736 = 3989.

So: quote the meta's classCount for the model's size, emittedClassCount for what a run covered, and the facade count for the generated Dart surface. The generated READMEs quote the first and say "model classes" for it.

Consuming the generated code

The same document is reachable three ways. (Dart shown; Python is the literal mirror — field.element_type, kind.value, SpecModel.from_json, etc.)

Typed path — tom_som_<lang>_v0

The typed classes are an editing facade over the runtime's SpecDocument. They are instantiated with the memory root and perform a version check at construction time (SOM §4.2). Loading/saving is always done through the document, never through the facade.

import 'package:tom_som_dart_runtime/tom_som_dart_runtime.dart';
import 'package:tom_som_dart_v0/tom_som_dart_v0.dart';

final doc = SpecDocument();
final sbp = D00SolutionBlueprint(doc);       // instantiation-time SOM §4.2 check
sbp.content = 'The system vision …';          // typed setter → writes the store
final csa = sbp.currentLandscape;            // nested section navigation
final metrics = csa.operationalMetrics;      // typed SomList: add()/length/[i]/items
metrics.add().content = 'Order turnaround: 4.2 days.';
sbp.objectModelVersion;                      // '0.0' — which _vN surface this is

Every typed root exposes static const String modelVersion and an objectModelVersion getter returning its own major.minor ('0.0' for the _v0 pre-release surface). The instantiation check compares this against the document's recorded stamp and throws SomVersionException (Dart) / SomVersionError (Python) when an older facade is asked to edit a newer document.

Generic path — tom_som_<lang>_runtime

No typed classes required — address sections by string path:

final doc = SpecDocument();
doc.setContent('SBP/content', 'The system vision …');
// List paths use the field's section-id (the meta-data names it):
final item = doc.addListItem('SBP/currentLandscape/CUOPME-OPER-LST');
doc.setContent('$item/content', 'Order turnaround: 4.2 days.');
doc.content('SBP/content');                  // read back
final yaml = SpecDocumentYaml.encode(document: doc, modelVersion: '0.0');
final json = doc.toJson();

Load/save: SpecDocumentYaml.decode / .encode for *.docspecs.yaml, and SpecDocumentMarkdown for the Markdown route (also the self-contained scanner — no external DocScanner binding required).

Reflection path — meta-model introspection

Load the package's own meta/spec_model.meta.json and traverse the schema value-free:

final meta = File('meta/spec_model.meta.json').readAsStringSync();
final model = SpecModel.fromJson(json.decode(meta));
final reflection = SpecReflection(model);
for (final root in model.roots) { /* 14 roots: type, title, sectionId, doc */ }
reflection.fieldsOf('D00SolutionBlueprint'); // each SpecField: kind, type, …
reflection.resolve('SBP/currentLandscape');  // path → model node

This is what lets a consumer modify a document generically and correctly — discover sections, field types, validation, form decomposition, and mapping targets — without compiling against the typed classes.

Versioning rules (SOM §4.2)

• The generated typed projects carry a version-label suffix

(tom_som_<slug>_v0). Projects are generated per major version of the model; multiple majors (_v1, _v2, …) can coexist in one codebase. - The generic runtime carries no suffix — one runtime per language, shared across majors. - A document records the model version it was authored with; the facade's instantiation check enforces: - a newer facade may edit older documents of the same major, upgrading the stamp on edit; - an older facade rejects editing newer documents of the same major; - different majors are never editable across each other — cross-major is read/convert only. - _vN trigger. While a major is pre-release the suffix stays v0 and the typed surface may change freely between regenerations. Backward-compatibility observation — and the move to _v1 — begins when a release.md is added to the model major.

Samples

Each language's runnable samples live in the generated v0 package (they survive regeneration) and are tabled in that package's own example README:

Language	Location	Run
Dart	tom_som_dart_v0/example/	dart run example/<file>.dart
Python	tom_som_python_v0/examples/	python3 examples/<file>.py
Java	tom_som_java_v0/	see the package's example README
JavaScript	tom_som_javascript_v0/	node examples/<file>.js
TypeScript	tom_som_typescript_v0/	tsc && node examples/<file>.js
Go	tom_som_go_v0/	go run ./examples/<file>
Rust	tom_som_rust_v0/	cargo run --example <file>
C	tom_som_c_v0/	make && ./examples/<file>
C++	tom_som_cpp_v0/	make && ./examples/<file>

Each provides the same triplet — a_typed_access, b_generic_document, c_reflection_metadata (the three access paths above) — building the same document shape so the three paths visibly converge across every language.

The three citation gates

The TomSpecs documents cite each other, the quest's todos and the editor's open-ends register by inline id. Every such citation decays silently: what it points at is renamed, archived or deleted, and the sentence goes on reading as if it were still true. Three commands close that, and each is also a test, so the corpus is held at zero violations in the default dart test run.

Todo citations. A quest-todo id is cited to say who owns an open question. check_todo_citations.dart resolves every backticked id-shaped token in tom_specs_model/doc — plus every TomSpecs README and every package doc/ folder (defaultCitedReadmes + defaultCitedDocFolders, the same closed sets the section gate holds) — against the active, archived and deleted todo files of the quests those documents cite (defaultCitedQuests — tom_specs and tom_core).

Four things about it are deliberate:

• Id shapes are discovered, not enumerated. The stems come from the todo

files themselves, so a citation of another quest's corpus resolves rather than going invisible — and a series nobody remembered to add to a list is still checked. The price of a shape rule is that ordinary technical terms collide with it; tool/todo_citation_vocabulary.txt is that price, paid one token at a time. It is a token list, never a path list. - Two exemptions, both inline, so an exemption travels with the line rather than blanket-exempting a file. <!-- todo-cite: provenance --> allows a closed citation only when the same line also cites an open todo — the legitimate case is a provenance note ("<landed prerequisite> landed — restated by <open todo>"), where the raiser is history and what it raised is open. The example is written schematically on purpose: an earlier version named a real pair, and each todo that closed had to re-point it at the next one, which then closed in its turn. A <!-- todo-cite: history --> standing alone on its own line exempts the whole document, for a changelog. - A citation must name exactly one todo. Ids are <stem>_<datecode>-<slug> and several campaigns renumber their follow-ups from 1 per prompt, using the date code to tell them apart — so a stem can carry many todos, and a bare-stem citation names all of them. That is the ambiguous verdict, a violation whatever the statuses behind it: answering with the first open record would make a stem whose older todo closed and whose newer one is open read as healthy forever, while a reader following it lands on either. The report names every id the stem matched, because the fix is always to write more of the id — and a citation carrying the date code resolves exactly, against ids equal to it or extending it at a - or _ boundary, so a truncated date code reads as the typo it is. Neither exemption applies: both excuse a citation of finished work, and ambiguity is not a question about status. - It checks citations, not claims. That a cited id still exists and is open is mechanical; that what the document says about it is still true is a semantic judgement and stays with a human reading pass.

The check runs from two places, because a citation goes stale from two sides: a documentation pass trips it through tool/regenerate_outlines.sh, and a todo archive trips it through test/todo_citations_test.dart, which runs in the default dart test.

Section citations. The same documents cite each other's sections far more often than they cite todos, and check_section_citations.dart resolves those. index.md owns the convention; this is its decision procedure. A bare §N means this document — that carve-out is what makes the rule decidable at all, since intra-document self-reference is how the documents overwhelmingly cite. A document name overrides it in exactly five ways: standing in front of the citation (across a soft line wrap, and as the tail of a markdown link), standing behind it (§N of <file>.md), inherited within a run (§N / §M / §K), document-map table-row scope, and its transpose table-column scope — a column headed ` <file>.md § ` governs the numbers beneath it. Every illustration here is written with metavariables: a real section number in an unqualified example would be read by the checker as a citation of a section of this README, which has none.

Three things about it are deliberate:

• Resolution is exact. §N.M.K resolves only against a heading N.M.K,

never through its parent. The relaxation was tried and hides real defects: it excuses a hundred citations belonging to another document, and nothing a parser can see separates those from the genuine case of a citation naming a numbered rule inside a section. So such a citation says so in words — "rule 6 of §N.M" — and a citation written as a section number has to be one. - What counts as a citation is decided by the id's shape, a dotted number or an upper-case symbolic id (PF-FLW-OVE), not by an exception list. §oneof, §item and the convention's own metavariable §N fall out for free, and a document that coins a new section-type name is covered on the day it is written. - The three narrow clauses are narrow on purpose. The run joiner admits only separators and joining words, so a name mentioned two clauses back cannot vouch for an unrelated citation; table-row scope fires only when the row's first cell holds a document reference and nothing else, because a table that cites another document in column one and its own sections in column two is not a document map; and a table-column header must carry a trailing §, which is what makes it say the column holds sections rather than merely mention a file.

Five verdicts come out — self, crossDocument, dangling, wrongSection, unverifiable — of which only dangling and wrongSection fail the run. A citation naming a document outside the scanned corpus is unverifiable, not a defect: the checker cannot see the file, which is not the same as the citation being wrong.

One exemption, and it is narrow by construction. A file that documents this convention has to exhibit its syntax, and an exhibit is a metavariable rather than a reference — nothing a parser can see tells the two apart, because they are deliberately identical. Where a metavariable will not serve, because the point being made is about particular numbers, the line carries <!-- section-cite: exhibit … -->, listing the ids it exhibits without the § sign. The marker is line-scoped and id-scoped: it excuses exactly those ids on exactly that line, and there is deliberately no document-level blanket, since the file the mechanism exists for also carries real citations two lines away. Markers inside fences are inert, and an id no citation on the line uses is reported as a stale exemption and fails the run — an exemption that excuses nothing is the register decaying in the other direction.

test/section_citations_test.dart fixes the rule against hand-written fixtures and closes the gate: its last tests hold the live corpus at zero violations and zero stale exemptions. The corpus is the doc folder, every TomSpecs README (defaultCitedReadmes), every package doc/ folder (defaultCitedDocFolders) and the citing source trees' /// comments (defaultCitedSourceRoots) — which is also what check_section_citations.dart scans by default, so the command and the gate cover the same files and neither list can drift from the other. Anti-vacuity is asserted per root rather than in aggregate, so a root that resolved to an empty directory cannot hide behind the five that did not. Pass --no-default-readmes / --no-default-sources to narrow the scan.

A Dart source is held to the same convention with one difference that decides its whole house style: a source file declares no sections, so it is scanned with an empty set of its own headings and the bare-§N carve-out has nothing to resolve against. Every citation in source must therefore name its document.

OE- citations. The third gate differs from the other two in where the citing side lives: OE- ids are cited from shipped source — comments in tom_specs_editor's lib/ and test/, notes in its pubspec.yaml and buildkit.yaml — as durable handles on seams and drop-in points, and they resolve against the Open-Ends Register in tom_specs_editor_specification.md §22. That register was once a pair of quest documents, and consolidating the editor specification deleted them without folding them in; 71 citations across 16 ids went on resolving to nothing until someone tried one, and three deferred.tom_specs.md entries paid for it by restating in prose what an id meant. check_oe_citations.dart makes the next such deletion fail a build step.

Two things about it are deliberate:

• *A row defines its id by carrying it in the row's first inline-code span*,

and nowhere else. One place to read, and no id can be defined by accident in running prose. In the register's own document that first token is therefore suppressed as a citation — but every other mention in the file, including the OE- a row's own prose cross-references, is checked normally. - It runs in one direction only: cited → defined. An id is allocated once and never reused, so the register deliberately keeps rows nothing cites any more — a retired row is what reserves its number. Checking the reverse direction would turn that invariant into a failure.

test/oe_citations_test.dart fixes the parse and match rules against fixtures and closes the gate: its last test holds the live corpus at zero violations over the same roots the command scans by default (defaultCitingRoots).

Architecture

tom_specs_clitool
├── bin/                      15 entrypoints — see "Entrypoints" above
├── tool/                     batch scripts, their shared lib, the data files gates read
└── lib/src/
    ├── model_reader.dart     analyzer-backed read of tom_specs_model → ModelClass graph
    ├── validator.dart        the STATIC tier: the model's own annotations
    ├── meta_tree.dart        the resolved graph → the language-neutral meta tree
    ├── som_<lang>_generator  ┐ nine emitter triples, one per language:
    ├── som_<lang>_emitter    ├─ generator = project + manifest + packaging
    ├── som_<lang>_meta_emit… ┘ emitter = typed facade · meta emitter = meta/
    ├── packaging.dart        the generated README / doc / manifest boilerplate
    ├── docspecs_*_generator  DocSpecs and YAML schema emission
    ├── spec_ops_generator    the SpecClassOps registry for tom_specs_model
    ├── serialization_order   the @SerializationOrder re-stamper
    ├── outline_writer.dart   the class-tree outline renderer
    ├── model_json_exporter   the class graph the editor and reviewer browse
    ├── model_freshness.dart  the model-source fingerprint behind the stamp
    ├── {todo,section,oe}_citations.dart · release_closure.dart · entrypoint_options.dart
    └── codespecs/            the CodeSpecs derivation-contract checks

   tom_specs_model ──ModelReader──▶ ModelClass graph ──▶ meta tree
                                          │                 │
                              validator ◀─┘                 ├──▶ 9 × typed emitter
                              outliner  ◀─┘                 └──▶ 9 × meta emitter

Type	Responsibility
ModelReader	The one analyzer-backed read of tom_specs_model . Everything downstream works on its ModelClass graph, so no other component parses Dart.
SpecModelValidator	The static tier — whether the model's own annotations are well-formed. Runs at generation time only; the instance tier (a concrete document's values) is each runtime's validateDocument .
MetaTree	The language-neutral resolved graph. Every one of the nine languages derives from this, which is why one freshness stamp covers all nine.
Som<Lang>Generator / Emitter / MetaEmitter	The nine emitter triples: project + manifest, typed facade, and meta/spec_model.meta.json respectively.
writeFacadePackaging (packaging.dart)	The generated README.md / readme_howtointegrate.md / manifest boilerplate each tom_som_*_v0 ships. renderFacadeReadme emits the whole tom_specs_documentation_standard.md §2 template, drawing on three inputs it keeps strictly apart ( tom_specs_documentation_standard.md §4.2): the shared body for what is the same in all nine, a required PackagingDescriptor field for each per-language nuance — never a branch on the language — and the emitted meta/spec_model.meta.json for what the model decides, so the document-roots table cannot drift from the package it describes. Hand-written doc/ folders survive it.
SpecOpsGenerator	spec_ops.g.dart — every class's snapshot/serialization contract, keyed by section id rather than Dart field name, plus each projection root's connect: binding.
ModelJsonExporter	The spec_model.json class graph the editor and reviewer apps browse.
ModelSurfaceFingerprint (model_freshness.dart)	Fingerprints the model source , never the generated output — fingerprinting the output would let a stale package match a stamp taken over its own stale self.
TodoCitations / SectionCitations / OeCitations	The three inline-citation resolvers, each with a closed default corpus so the command and the test cover the same files.
ReleaseClosure	The dependency-closure walk over tool/release_set.yaml.
DocCoverage	The public-API dartdoc coverage walk over tool/doc_coverage_manifest.yaml.
EntrypointOptions	Holds this README's bin/ table against each entrypoint's ArgParser , in both directions.

Ecosystem

                       tom_specs_core        (the annotations the model is written in)
                             │
                             ▼
                       tom_specs_model       (the annotated Dart model — data only)
                             │  read once by ModelReader
                             ▼
                    ▶ tom_specs_clitool ◀    (this package: read · validate · emit)
                             │ emits
      ┌──────────────────────┼──────────────────────┐
      ▼                      ▼                      ▼
 tom_som_dart_v0    tom_som_python_v0   …  tom_som_cpp_v0     (9 typed facades)
      │                      │                      │
      ▼                      ▼                      ▼
 tom_som_dart_runtime  tom_som_python_runtime  … (9 hand-written runtimes)
      │
      ├──▶ tom_spec_engine ──▶ tom_forge/tom_specs_editor
      └──▶ tom_specs_reviewer

Further documentation

TomSpecs subject matter — the authorities this package implements:

Document	Authority for
index.md	The catalogue of the whole TomSpecs document set, and the § citation convention the gates here resolve
som_multiplatform_spec_model.md	The nine-language generation, the metadata tree, the generated/runtime/meta classes, serialization, schema generation, the embedded validator and language packaging
som_generator_config.md	The tom-spec-object-model config block — languages, output roots, version label, document roots
som_toolchains.md	The per-language build and verify toolchains, and running the Dart host with no installed SDK
tom_specs_model_meta_schema.md	The on-disk schema of the emitted spec_model.meta.json , its two version stamps, and the committed-asset refresh procedure
tom_specs_model_rules.md	The model-authoring rules, the seventeen structural invariants the validator enforces, and the outliner
codespecs_derivation_contract.md	What bin/validate_codespecs.dart checks, and why each corroborating input is needed
codespecs_mapping.md	The parts catalogue bin/codespecs_areas.dart transcribes

This package — its own guides:

Guide	Covers
doc/index.md	The catalogue of this package's documentation
doc/generating.md	The canonical regeneration, stamping, the ad-hoc entry points and the freshness stamp
doc/inspecting_the_model.md	The outliner, the JSON exporter, and reading an outline's notation
doc/gates.md	Running each gate, reading a citation failure, and why the scan sets are closed
doc/api/api_summary_index.md	The per-module API summaries
_copilot_guidelines/index.md	The index of this package's development guidelines
_copilot_guidelines/som_regeneration.md	When to re-run generate_som.dart , what the freshness fingerprint covers, and what it deliberately ignores

Siblings — packages you will reach for next:

Package	What it is
tom_specs_model	The annotated Dart model this package reads — and the home of all TomSpecs subject-matter documentation
tom_specs_core	The annotation library the model is written against
tom_som_dart_runtime	The hand-written generic Dart runtime the emitted facade layers over
tom_som_dart_v0	The generated typed Dart facade — the reference output of this generator
tom_som_conformance	The cross-language harness that holds all nine ports to the same behaviour
tom_spec_engine	The scripting and agent plane built on the generated Dart pair

Status

Version 0.2.0, published to pub.dev.

1006 tests passing, 6 skipped. The skips are toolchain-gated — a suite that needs a language runtime this host does not have reports as skipped with the reason stated rather than as a red suite. Run them with dart test or testkit :test.